Epoxy Resin is widely used for civil and architectural works because it has the properties of superior adhesiveness,abrasion resistance, chemical resistance, low shrinkage and stability. It is one of the high polymer synthetic resins which are widely used as an adhesive material not only for general concrete works but also for the repairing of cracks of concrete structures, filling reinforcement of steel plate and anti-infiltration of carbon fiber.
We have been supplying the customized products for a variety of civil work sites including Seoul Metro, Incheon Urban Railway, Daegu Urban Railway, Geojaedo Chimmae Tunnel, Kori Nuclear Power Plant, etc. and doing our best efforts to supply more upgraded products. DH-EM80 is a quality products that has been developed based on our know-how accumulated through our plenty experience in the numerous sites as grouting material for air voids of anti-dust fastening devices of subway and rail track system.

Repair and reinforcement of poorly worked parts or weakened parts of concrete structures

Reinforcement of floor base of airport or pier

Reinforcement of floor base of factory or large machine as well as the floor on which heavy machinery is operating.

Flooring of power plant and substation of subway.

Bottom reinforcing filler of dust proof fastening devices of subway.

Bottom reinforcing filler of dust proof fastening devices of railway.

Hardening time for the appearance of hardening properties.(based on the temperature of 23℃).

Repair and reinforcement of poorly worked parts or weakened parts of concrete structures

Reinforcement of floor base of airport or pier

Reinforcement of floor base of factory or large machine as well as the floor on which heavy machinery is operating.

Flooring of power plant and substation of subway.

Bottom reinforcing filler of dust proof fastening devices of subway.

Bottom reinforcing filler of dust proof fastening devices of railway.

Hardening time for the appearance of hardening properties.(based on the temperature of 23℃).

All the equipments and tools that are used for this operation should be cleaned when the operation Is finished. Detergent such as M.E.K, Acetone, Xylene, Toluene and epoxy thinner should be used when cleaning. If the Foam is smeared on your skin during the performance, wash it immediately with flowing water.

- When you treating medical fluid, make sure you wear protective helmet, goggle clothes and other protective devices.
- If the medical fluid is smeared on your skin, wash it off immediately and clean up with soapy water.
- All the hand tools and equipments that are used for this operation should be cleaned with thinner thoroughly.
- If you are working in sealed room, then make sure to conduct constraint ventilation for clean air.
- If the medical fluid is smeared on your skin and causes skin trouble, then you should go see specialist for prescription.
- If the temperature is below 5℃, then you must artificially raise up the temperature of medical fluid. This way you can get proper Pot Life.
- If the atmosphere temperature is high and the area is humid, Pot Life of medical fluid quickens. On the contrary, Pot Life will slow down in low temperature area.
- Be aware of it before you conduct the operation.

Recommended temperature for storage is 10~25℃ with no moisture. Store it in cool area. Storing period is about 6 months in sealed condition however it can be corrupted according to storing area and conditions. Preferably use it as soon as possible.